WISE-7901D

Артикул: 3680

Есть в наличии

Описание
Характеристики

WISE PoE Controller with LED Display (RoHS) for X-Board (X107, X109, X110, X111, X202, X203, X303, X304, X305, X308, X310, X324)

System
Процессор	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
EEPROM	16 KB
Сторожевой таймер	Да (0.8 секунд)
NVRAM	31 Bytes
ОС	MiniOS7
Часы реального времени	RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079
64-бит ключ	Да
Интерфейсы
PoE Ethernet Port	RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1	No (Unsupported by WISE firmware)
COM 2	No (Unsupported by WISE firmware)
LED Indicators
System LED	Да
LED Display	5-digit 7-segment LED display
Special Indicator	PoE LED
Hardware Expansion
I/O Expansion Bus	Да
Power Requirements
Reserve Polarity Protection	Да
Powered from PoE	Yes, IEEE 802.3af, Class1
Consumption	2.5 W
Frame Ground	Yes (for ESD Protection)
Input Range	+12 ~ +48 VDC
Mechanical
Dimensions (W x H x D)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-40 ~ +80 °C
Humidity	5 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Schedules	Setup prescheduled routine tasks.
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
AI Channel	=, <, >, >=, <= (value)
Internal Register	=, <, >, >=, <= (value)
DI Counter	=, >, <, >=, <=(value), Change
DO Counter	=, >, <, >=, <=(value), Change
Timer	Timeout, Not Timeout
Schedule	In Range, Out of Range
P2P	DI, AI, DI counter, DO counter, IR
Rule Status	Enable, Disable
THEN / ELSE Actions
DO Channel	ON, OFF, Pulse Output
AO Channel	Change the value
Internal Register	Change the value
DI Counter	Reset
DO Counter	Reset
Timer	Start, Stop
Schedule	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
P2P	DO(On/Off), AO, IR
Rule Status	Enable, Disable

Производитель:

Промышленная автоматизация

WISE-7901D

Главное меню

Каталог

Полезные ссылки