WISE-7151

Артикул: 3675
Есть в наличии

Цена по запросу

добавить к сравнению перейти к сравнению
Быстрый заказ
  • Описание
  • Характеристики
16-channel Isolated Digital Input WISE PoE Controller (RoHS)

 

Дискретный ввод  
Количество каналов 16
Тип входа Wet Contact (Sink, Source)
Уровень логической "1" +10 VDC ~ +50 VDC
Уровень логического "0" +4 VDC Max
Входное сопротивление 10 k
Защита от перенапряжений +70 VDC
Дискретный ввод, счетчики  
Мах. значение 65535 (16 bits)
Max. входная частота 50 Hz
Mин. длительность импульса 10 ms
System  
Процессор 16-bit CPU
SRAM 512 KB
Flash Memory 512 KB
Сторожевой таймер Да
Интерфейсы  
PoE Ethernet Port 10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2 Way Isolation  
I/O 3750 Vrms
EMS Protection  
ESD (IEC 61000-4-2) 4 kV Contact for each terminal
EFT (IEC 61000-4-4) +/-2 kV for Power
LED Indicators  
PoE PoE On
L1 System Running
L2 Ethernet Link/Act
L3 Ethernet 10/100M Speed
Power Requirements  
Reserve Polarity Protection Да
Powered from terminal block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 3.9 W
Mechanical  
Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment  
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Functions  
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions
12 Emails Send Email messages to pre-set Email receivers.
12 CGI Commands Send pre-set CGI commands.
12 Recipes Set up THEN/ELSE action groups.
8 P2P remote modules Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions  
DI Channel ON, OFF, ON to OFF, OFF to ON, Change
Internal Register =, <, >, >=, <= (value)
DI Counter =, >, <, >=, <=(value), Change
Timer Timeout, Not Timeout
P2P DI, AI, DI counter, DO counter, IR
Rule Status Enable, Disable
THEN / ELSE Actions  
Internal Register Change the value
DI Counter Reset
Timer Start, Stop
Email Send
CGI Commands Send
Recipe Execute
P2P DO(On/Off), AO, IR
Rule Status Enable, Disable

 

Производитель: ICP-DAS

Главное меню

Каталог

Полезные ссылки

Цена
от
до
0 Корзина
Заказ в один клик